Black Box LE076A, LE172, LE075A-R2, LE073AE-R2, LE074AE-R2, LE072A LANtastic/Al version 5.x Driver

MODULAR PARALLEL ADAPTERS AND MODULAR MEDIA UNITS

7.In the “Network Settings” window, choose “OK.” From the next window choose “Restart Computer.”

The content of the Modular Parallel Adapter OEMSETUP.INF file is:

[disks]

A:=., “Modular Parallel Adapter install”

[netcard]

ms$sndis=“Modular Parallel Adapter”, 0, ndis, ethernet, real, ms$sndis, ms$sndis_nif

[ms$sndis] devdir=b:setndis.dos device=SETNDIS.DOS, @devdir\SETNDIS.DOS

[ms$sndis_nif]

DRIVERNAME=SETNDIS$

Note that the [netcard] section consists of one line only.

4.4.2CONFIGURATION (OPTIONAL)

The SETNDIS is a self-configuring driver that automatically detects the correct LPT port, Interrupt line, and Unidirectional/Bidirectional mode to be used. If you have a special configuration, you may need to override this automatic selection by editing the PROTOCOL.INI file.

The Adapter’s section in the PROTOCOL.INI includes:

;MODULAR PARALLEL ADAPTER DRIVERNAME = SETNDIS$

;POLLING

;UNIDIR

;LPTn

;EPP

;DISABLELINK

Lines preceded by semicolons are comments. To select an option, edit the semicolon out of the corresponding line.

4.5 LANtastic/Al version 5.x Driver

4.5.1INSTALLATION

1.Run the LANtastic/Al v5.x INSTALL program.

2.Complete the installation by entering default parameter for the LAN adapter and exit the INSTALL program.

3.Copy the driver from the Network Drivers diskette to the Network Operating System (NOS) subdirectory (default is C:\LANTASTI): copy a:\lantasti\*.* c:\lantasti

4.Edit the file STARTNET.BAT in the C:\LANTASTI by deleting the line which starts with 3C503MM and insert a new line:

SETAILAN verbose

5. Installation is complete.

18