MODULAR PARALLEL ADAPTERS AND MODULAR MEDIA UNITS
4. Software Setup and Operation
The Modular Parallel Adapter is supplied with software driver programs that support all major network operating systems. These drivers are found on the Network Drivers diskette. This chapter describes the use of each driver in a major NOS. Instructions on how to use the other drivers are included in the README.DOC File on the Network Drivers diskette.
The \ODI subdirectory contains the following DOS ODI files for use with Novell NetWare and other network operating systems using the ODI specifications:
•LSL.COM — The Novell Link Support Layer program
•SETODI.COM — Proprietary Ethernet ODI driver
•IPXODI.COM — Novell’s IPX™ program
4.1 Supplied Files
The Network Drivers diskette contains the following files:
•README.DOC — Update information about the software
•SETDIAG.EXE —
•SETDIAG.HLP— Help file for the diagnostic program
•PROTOCOL.INI — Protocol initialization file for NDIS setup
•OEMSETUP.INF — Configu- ration file for Windows for Workgroups
•SETNDIS.DOS — DOS NDIS driver for Windows for Workgroups
•NETX.EXE — NetWare shell for use with DOS
•STARTNET.BAT — A batch file containing all commands required to load the driver
•NET.CFG — Sample protocol configuration file
The \NDIS subdirectory contains NDIS files for use with the following network operating systems:
Microsoft LAN Manager, 3Com3+Open, Banyan® VINES™, DEC™ Pathworks™, and other network operating systems using the NDIS interface specifications.
•
DOS
•
12
