Black Box LRA2900A manual bits -No Parity -1 Stop bit -No flow control

Model LRA2900A RAS Getting Started Guide 3 • Configuring the RAS for operation

–8 bits

–No Parity

–1 Stop bit

–No flow control

3.Set up HyperTerminal™ as follows:

–Open a HyperTerminal session.

–Enter a name for this connection.

–Click on the Connect using: pop-up menu and choose the Direct to ComX option (where X is the number of the COM port onto which you connected the cable in step 1) (see figure 12).

Figure 12. Hyperterminal properties

– Configure the COM port settings as shown in figure 13.

Preparing the RAS for configuration 30