Black Box LRA2900A manual Click on Submit

3 • Configuring the RAS for operation Model LRA2900A RAS Getting Started Guide

11.Type the Calling Number Total Digits in the box provided. This setting tells the RAS how many digits to expect from the phone company. This number is the calling party’s phone number or Caller-ID informa- tion.

12.Set the First/Middle and Last Response Codes. These are the codes the switch expects after each digit sent by the switch.

13.Click on Submit.

signaling is now configured for MFC-R2.

Note The information entered into the Interregister Signaling section must match the information the telco provided. If the information entered is not the same, the RAS may not answer calls. In some installations, the phone company will send a special tone to alert that it is done sending the Calling Number. In this case, the value in the Total Dig- its box does not have to match the telephone company’s exactly.

Channel assignment

This section describes configuring the RAS so it will know which channels are active. Do the following:

1.Select T1/E1 Link on the Configuration Menu. The T1/E1 Link Activity window appears (see figure 27 on page 42).

2.Click on Channel Assignment. The WAN Circuit Channel Assignment window appears (see figure 31).

Figure 31. WAN Circuit Channel Assignment window

3.Click on the Dialin button located under Set all channels to:.

4.Click on Submit Query.

45 Configuring the RAS with a Web browser