Model LRA2900A RAS Getting Started Guide | 5 • Troubleshooting and maintenance |
|
|
Periodic maintenance
Other than using a
Calibration
The RAS requires no calibration.
Maintenance
This section describes replacing the RAS.
Replacing the RAS
If you isolate a problem to the a RAS component, the entire RAS must be replaced as follows:
Exporting the current RAS configuration
The Import/Export function enables you to make a backup (or export) copy of your access server’s configura- tion parameters. By exporting the configurations, the saved files can quickly be loaded (or imported) into a replacement access
1.If you already have a recently exported backup of your configuration, go to “Removing the defective RAS” on page 60.
2.To export a configuration, connect your Web browser to the Administration Pages, then click on Import/ Export under the Configuration Menu to display the Import/Export main window (see figure 35).
Figure 35. Import/Export main window
Periodic maintenance | 58 |