3 • Configuring the RAS for operation | Model LRA2900A RAS Getting Started Guide |
|
|
To save the displayed data as a text file, select the Save option on your browser (see figure 34). For example, under Netscape, select File > Save As. A dialog box will display enabling you to save the contents of the export parameters to a text file. Select the location where you want the file stored, type a file name, and click Save.
Figure 34. Saving the access server flash memory configuration data as a text file
Completing the installation
This section verifies that the RAS is fully operational.
1.Temporarily disconnect the male ends of both power cords from the power outlet. Wait 30 seconds, then plug the power cords in again.
2.Verify that the green POWER LED is lit. If the POWER LED is flashing green, refer to Chapter 5, “Trou- bleshooting and maintenance”.
3.Verify that the Link 1 Frame LED illuminates, indicating that the RAS is synchronizing with the T1/E1/ PRI signal.
4.Verify that after 5 seconds, the Link A Error LED begins flashing, indicating that the RAS is satisfied with the quality of the T1/E1/PRI signal.
5.Verify that after 10 seconds, the Link A Error LED extinguishes, indicating that the RAS is satisfied with the network signal and that the link is ready for use.
49 | Completing the installation |