Black Box LRB500A quick start Connect a network cable from the DSL or cable modem to the WAN port

NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH QUICK START GUIDE

5.Connect a network cable from the DSL or cable modem to the WAN port.

6.Connect the provided power-supply cable to the 5-VDC power port on the back of the router. Plug the power supply into an AC power outlet as shown.

7.Power on your DSL or cable modem.

8.If you are using an analog modem or ISDN TA, power on the device.

9.Press and hold the Router’s Reset button for 3 seconds to restore the default settings.

10.You are ready to configure software for your router and network PCs.

10