Black Box LRB500A 12. Modem Initial Command dialog box, Software Installation and Configuration

CHAPTER 3: Software Installation and Configuration

13. The Modem Initial Command dialog box appears (see Figure 3-12).

Figure 3-12. Modem Initial Command dialog box.

Select your modem manufacturer and model and click OK.

NOTE

This setting configures the initial string of the asynchronous port on the Router so that it will know how to communicate with your modem. If you are using an analog modem and your modem is not included in the selection list, in most cases, Standard Modem will work. If you are using an ISDN TA, refer to the ISDN TA’s User Guide for information on the initialization and hang-up strings. Use Broadband Manager to enter your modem or TA strings.

14.The Setup Wizard: Modem Setting dialog box re-displays.

Use the Asynchronous port settings list to select the baud rate. Select the DTE speed (that is, the speed of communication between the asynchronous port of the Router and the modem). For DCE speed compression modems, this value can normally be set to about 4 times the speed of your modem. Keep in mind that if you set the baud rate too high, the dialup connection may fail.

25