Black Box LRB500A quick start Asynchronous Port Function dialog box

NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH QUICK START GUIDE

9.The Asynchronous Port Function dialog box appears (see Figure 3-6). Select from Remote Access, IP Routing (NAT Enabled), or IP Routing (NAT Disabled).

Figure 3-6. Asynchronous Port Function dialog box.

•Select Remote Access to allow remote users to dial-in to the network to access resources as if the remote user is connected to the network locally. Continue with the Remote Access instructions on the next page.

•Select IP Routing (NAT Enabled) to allow all users in the two IP segments (LAN and WAN Ethernet) to share one IP address to the Internet. You may also select this option to use the async port for dial-up backup in the event the DSL or cable becomes unavailable. (See page 22.)

NOTE

The IP Routing (NAT Enabled) feature of the async port is valid only if the WAN port is configured as NAT Disabled.

•Select IP Routing (NAT Disabled) to connect other IP segments through the async port. Proceed to the IP Routing instructions (see page 22).

Click Next>>.

18