Blomberg KSM 9520 A+, KSM 9520 XA+ manual Electric connection, Disposing of the packaging

Models: KSM 9520 XA+ KSM 9520 A+

1 216
Download 216 pages 8.79 Kb
Page 12
Image 12

4.Plug the refrigerator into the wall outlet. When the fridge door is open the fridge compartment interior light will come on.

5.You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.

6.Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.

Electric connection

Connect your product to a grounded socket which is being protected by a fuse with the appropriate capacity.

Important:

The connection must be in compliance with national regulations.

The power cable plug must be easily accessible after installation.

Voltage and permitted fuse protection are indicated in the “Specifications” section.

The specified voltage must be equal to your mains voltage.

Extension cables and multiway plugs must not be used for connection.

A damaged power cable must be replaced by a qualified electrician.

Product must not be operated before it is repaired! There is danger of electric shock!

Disposing of the packaging

The packing materials may be dangerous for children. Keep the packing materials out of the reach of children or dispose them of by classifying them in accordance with the waste instructions. Do not dispose them of along with the normal household waste.

The packing of your refrigerator is produced from recyclable materials.

Disposing of your old refrigerator

Dispose of your old machine without giving any harm to the environment.

You may consult your authorized dealer or waste collection center of your municipality about the disposal of your refrigerator.

Before disposing of your refrigerator, cut out the electric plug and, if there are any locks on the door, make them inoperable in order to protect children against any danger.

The climate class rate of your appliance is given on the rating label located inside the appliance. It specifies the appropriate operating ambient temperatures as explained below.

Climatic class

Ambient temperatures

SN

+10 °C to 32 °C

N

+16 °C to 32 °C

ST

+18 °C to 38 °C

T

+18 °C to 43 °C

SN-ST

+10 °C to 38 °C

SN-T

+10 °C to 43 °C

9

EN

Page 12
Image 12
Blomberg KSM 9520 A+, KSM 9520 XA+ Electric connection, Disposing of the packaging, Disposing of your old refrigerator