Blomberg KSM 9520 XA+, KSM 9520 A+ Using your refrigerator, Thermostat setting button, Defrost

4Using your refrigerator

Thermostat setting button

The interior temperature of your refrigerator changes for the following reasons;

•Seasonal temperatures,

•Frequent opening of the door and leaving the door open for long periods,

•Food put into the refrigerator without cooling down to the room temperature,

•The location of the refrigerator in the room (e.g. exposing to sunlight).

•You may adjust the varying interior temperature due to such reasons by using the thermostat. Numbers around the thermostat button indicates the cooling degrees.

•If the ambient temperature is higher than 32°C, turn the thermostat button to maximum position.

•If the ambient temperature is lower than 25°C, turn the thermostat button to minimum position.

Defrost

A) Fridge compartment

Fridge compartment performs full- automatic defrosting. Water drops and a frosting up to 7-8 mm can occur on the inner rear wall of the fridge compartment while your refrigerator cools down. Such formation is normal as a result of the cooling system.

The frost formation is defrosted by performing automatic defrosting with certain intervals thanks to the automatic defrosting system of the rear wall. User is not required to scrape the frost or remove the water drops.

Water resulting from the defrosting passes from the water collection groove and flows into the evaporator through the drain pipe and evaporates here by itself.

Check regularly to see if the drain pipe is clogged or not and clear it with the stick in the hole when necessary.

Deep freezer compartment does not perform automatic defrosting in order to prevent decaying of the frozen food.

12

EN