663 76061 Owners Manual for 9102A Single Satellite Brewer
CLEANING INSTRUCTIONS
PROCEDURE: Clean Coffee Brewer
PRECAUTIONS: Turn POWER SWITCH OFF.
| Allow brewer to cool. |
FREQUENCY: | Daily |
TOOLS: | Mild Detergent, Clean Soft Cloth or Sponge |
| Bristle Brush |
1.Turn POWER SWITCH OFF. Allow brewer to cool.
2.Remove satellite.
3.Remove and empty brew chamber.
4.Remove spray disk and gasket from spray head
5.Wipe inside of spray head and area around spray head with a soft clean cloth or sponge moistened with clean water.
6.Wash spray disk in a sink using warm water and a mild detergent. A bristle brush may be used to clear clogged spray holes. Rinse spray disks with clean water and allow to air dry.
7.Wash brew basket in a sink using warm water and a mild detergent. A bristle brush may be used to clean around the wire racks and bypass channels. Rinse with clean water and allow to air dry. Be sure wire rack is properly installed.
8.Remove and drain the drip tray. Rinse in a sink under warm running water. Allow to air dry, then reinstall on brewer.
9.Wipe exterior of brewer and satellites with a soft clean cloth or sponge moistened with clean water.
10.Reinstall gasket INSIDE brew head, then reinstall spray disk.
11.Reinstall brew chamber.
12.Reinstall satellite.
Procedure is complete
9
CLEANING INSTRUCTIONS
CAUTION:
Burn Hazard
Brewing and serving temperatures of coffee are extremely hot.
Hot coffee will cause serious skin burns.
IMPORTANT:
DO NOT use steel wool, sharp objects, or caustic, abrasive or chlorinated cleansers to clean the brewer, brew baskets or satellites.
DO NOT immerse or submerge satellites in water.