Bloomfield 9454, 9456 CLEANING INSTRUCTIONS continued, PROCEDURE Weekly Cleaning & Sanitizing

CLEANING INSTRUCTIONS (continued)

CAUTION:

BURN HAZARD

Hot water in the tank can cause severe burns. Allow machine to cool before moving or servicing. DO NOT tip or move machine when water in tank is hot.

CAUTION:

SHOCK HAZARD

Do not submerge dispenser in water. Do not pour or splash water into cabinet, keypad or front door.

IMPORTANT:

DO NOT use steel wool, sharp objects, or caustic, abrasive or chlorinated cleansers to clean dispenser or hoppers.

PROCEDURE: Weekly Cleaning & Sanitizing

PRECAUTIONS:	Disconnect dispenser from electric power and
	allow to cool.
	Avoid splashing hot water from tank
FREQUENCY:	Weekly
TOOLS:	Small Flat-Blade Screwdriver
	Bottle Brush of Stiff Bristle Brush
	Mild Detergent, Clean Soft Cloth or Sponge

1.Disconnect dispenser from electric power and allow to cool. Open front door.

FOR EACH DISPENSING STATION:

2.Remove the blender housing assembly:

a.Remove funnel cap: Lift cap straight up. Some twisting may be necessary.

b.Turn blender housing 1/4 turn clockwise while pulling away from blender base.

c.Disassemble funnel, diverter and cap from blender housing.

3.Remove whipper blade:

Pull whipper blade straight off of the motor shaft.

Note the flat portion of the motor shaft, and how it relates to the center D-hole in the whipper blade.

4.Remove the O-ring and seal: Slide the O-ring off motor shaft. Using a small, flat-blade screwdriver, work blender seal from blender base and off of motor shaft.

5.Wash all parts of the mixing system with a solution of one ounce of a mild dishwashing detergent or sanitizer in one gallon of 110ºF warm water.

6.Using a bottle brush, completely clean the blender base. Rinse in clean warm water.

7.Wipe area around blender base with a clean cloth dampened with warm water and mild detergent. Rinse by wiping with a clean cloth dampened with warm water.

8.Reassemble components in reverse order.

Procedure is complete

12