SERVICING INSTRUCTIONS
CAUTION:
SHOCK HAZARD
Opening access panels may expose uninsulated electrical components.
Disconnect dispenser from electrical power before removing any panel. Do not attempt to repair or replace components without first unplugging the power cord. Use caution when adjusting water flow rates or testing voltages with power applied to the unit. Electrical shock can cause injury or death.
HOT WATER ADJUSTMENT
The desired taste of product being served is obtained by adjusting the water flow screw .
NOTE: When making the adjustment the selector switch must be in the HOT/HOT position.
Each blender system has its own hot water dispense valve for located behind the blender assembly.
1.Locate the Phillips head screw with the white washer behind the screw. This is the water flow adjustment.
2.RICHER (less water):
Turn the screw head clockwise and press the screw head firmly onto the white washer.
LEANER (More water): Turn the screw head counter- clockwise and press the screw head firmly onto the white washer.
16