Reference

Set-up 5 TV with Motorised System and Positioner

Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the back of the STB and the other end to a RCA/Cinch socket on your TV.

If your TV doesn’t have a RCA/Cinch socket, connect one end of RF cable to the RF OUT on the back of the STB and the other end to a RF input socket on your TV.

Connect the coaxial cable from the LNB of your motorised system to the LNB IN socket on the STB.

Connect the motor cables to your positioner.

(please refer to the manual for your positioner and actuator)

Connect your positioner to your TV if necessary.

Reference

DiSEqC 1.0 Connection

All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the STB at the same time.

If you have two or more fixed antennas or LNBs then we recommend you use a DiSEqC 1.0 swtich.

Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC swtich.

Do the same for any other LNBs that you have.

Connect one end of a Coaxial cable to the RX output connector of the DiSEqC swtich, connect the other end to the LNB IN socket on the STB.

DiSEqC 1.2 Connection

Please refer to 34 page.

Connection of satellite antenna

To the digital receiver, you can connect either a single satellite antenna directly or LNB of multi-feed equipment.

11

Page 12
Image 12
Bodum F1-ACE user manual Reference, Set-up 5 TV with Motorised System and Positioner