Satellite Name
Selects the satellite name that corresponds to the value of the Antenna Alternative.
1.Press the 
/ 
keys to display the Satellite List box.
2.Select the wanted satellite name.
3.If the desired satellite name is not in the list then select User Defined.
4.The keyboard will appear and you can input the satellite name directly. The selected satellite name can be help to select the antenna alternative in the searching menu, but it is only possible to change or select the satellite name in the Antenna Setting menu.
5.Satellite name list is put in alphabetical order and the order can be changed according to menu language.
6.When inputting the satellite name,there is a 16 character limit.
LNB Frequency
1.Select the L.O. Frequency that is set to antenna.
2.You can select the LNB frequency of 5150, 9750, 10600, 10750, 11475MHz or Universal by using the 
/ 
keys.
3.If the required LNB frequency is not available, then select
"0" and enter the frequency manually using the 0 ~ 9 keys.
4.When you select Universal LNB, both 9750 and 10600 MHz are supported at the same time, and therefore the 22KHz tone setting is not needed. (Disabled)
22KHz Tone
In case you are using a Dual LNB or two antennas connected to a 22KHz tone switch box, make 22KHz tone switch Enable or Disable to select LNB or antenna.
DiSEqC Input Selection
According to the option and position of DiSEqC switch select from A to D of DiSEqC and Disable. After setting the above- mentioned value, press the OK key (except in Satellite Name) to move to the Manual Search menu directly.
Guide of
Main Menu
selects the satellite name you want to find
confirm the satellite name and returns to the antnna setting menu. If you press OK key at ‘User Defined’, then the character table will displayed and you can input the name on the keyboard.
return to the antenna setting menu exit from the menu screen
26
