Guide of

Main Menu

move the cursor

select the searching parameters and type

input the symbol rate directly start the Automatic search return to the previous menu exit from the menu screen

C. Automatic Search

When you enter the Satellite Name that is set in Antenna Setting menu, search all of the selected satellite without inputting the extra frequency.

Antenna Alternative

Select the target antenna for automatic service search.

The attribute of this antenna alternative number is already set in Antenna Setting menu and the satellite name is helpful in the selection of the antenna, but in this menu you cannot change the satellite name.

Searching Mode

You can select one of two modes (Quick or Detail). When you select Quick mode, it searches the service by search parameters that is preset.

When you select Detail mode, it searches the service through all field of tuner(950-2150MHz).

Detail Mode

The pre-fixed symbol rate list is changed according to antenna alternative and satellite name. If you want to add or change it, press the i (red) key. The picture of the symbol rate Add/Change mode is as follows:

1.You cannot change or delete the grey coloured part of the above box that marks symbol rate.

2.You can add, delete or change the white coloured part of the above box that marks the symbol rate.

3.To add the symbol rate, move the cursor to blank box and input the symbol rate that you want to add using the 0 ~ 9 keys.

4.Press the OK key to confirm.

5.If you want to go back to the previous figure during

inputting of symbol rate, press the key.

To change the symbol rate, move the cursor to the position that you want to change and input the new symbol rate. To delete a symbol rate in the above list, press the Red key in the selected position and then the symbol rate dis- appears. The range of symbol rate that is input additionally is 16-30Ms/s.

6.Press the EXIT key to return Automatic Search menu.

31

Page 32
Image 32
Bodum F1-ACE user manual Automatic Search, Searching Mode, Detail Mode