Motorised
System
7. Automatic Search
It is possible to use automatic search for Astra and/or Hotbird using the DiSEqC 1.2 motorised system.
1.Ensure that the positions for Astra and/or Hotbird are correct. (see Section 3 and 4 above)
2.In the Main Menu, select the option channel searching and press the OK key.
3.In the Channel Searching menu, select automatic search and press the OK key.
4.When you search new services, please refer to C.Automatic Search of 31page.
5.When the search has finished, press the OK key to store and view the channels.
Now that you have stored all the positions of the satellites and searched for all the services you want, you can now use your receiver as normal. When you change to a service that is being transmitted from a different satellite, you will have to wait a few seconds to allow the motor to move into position to receive the new channel.
37
