en
Cancel programme (Reset)
Only when the master switch is ON. Press the A and C buttons simultaneously, and hold them pressed for approx. 3 seconds.
The numerical display shows . Close the door.
The programme continues for approx.
1 min.
When it has ended, set the main switch
1to OFF.
Close the detergent compartment 30 . To restart the dishwasher, set main switch
1to ON again and select desired programme.
Changing the programme
It is possible to change the programme within 2 minutes after you have switched the dishwasher on.
Should it be necessary to change the programme after this period, the programme cycle that has already been begun (e.g. washing) will be completed first of all.
The new remaining time displayed is the sum of the remaining time from the preceding programme cycle and the remaining time attributable to the new programme that has been selected.
Additional functions *
*on applicable models
Pre-Soak *
The
Time reduction/ time saving *
Pressing the ªTime reduction/time savingº button provides a short wash cycle by curtailing the drying phase and the washing time. The washing and drying performance will be reduced with the Time reduction/time saving programme option.
Washing contents of UPPER RACK only *
If you have a small number of dishes to wash in the upper rack (e.g. glasses, cups, plates), switch on the UPPER RACK function. If you select the UPPER RACK function, the lower rack must be empty. Add a reduced amount of detergent compared to that which is recommended for a full load.
Washing contents of
LOWER RACK only *
If you have a small number of dishes to wash in the lower rack (e.g. plates, pans, bowls), switch on the LOWER RACK function. If you select the LOWER RACK function, the upper rack must be empty. Add a reduced amount of detergent compared to that which is recommended for a full load.
20