en
Spray arms
Lime and remnants of food in the washing water can block the nozzles in the spray arms 22 and 23 and the arm mountings .
Inspect the nozzles in the spray arms for blocked holes due to remnants of food.
If necessary, pull the lower arm 23 upwards and lift it off.
Unscrew the upper spray arm 22 .
Clean both spray arms under running water.
Refit the spray arms. Ensure that the lower arm has locked into place and the upper one is screwed tight.
3 |
2 |
1 0 |
Spray arms
Pump *
*on applicable models
Larger remnants of food that have not been trapped by the filters and have been left in the water can cause a blockage in the pump. The water is no longer pumped out of the dishwasher and it can be seen covering the filter.
Proceed as follows:
Ladle out as much water as possible.
Remove the filters 25 .
Undo the screw in the cover (Torx T 20) and remove the cover.
Inspect the inside and remove any obstructions that you find.
Torx T20 |
1 |
2 |
22