en
Water remains inside appliance after programme has ended
Blockage or kink in drainage hose. Pump is jammed.
Filters are blocked.
The programme is still running. Wait for the programme to end (numerical display will indicate 0). Perform ªResetº function.
... during washing
Unusual amount of foam is created
Normal washing up liquid has been poured into the
Remove any spilled rinse aid with a cloth as it could otherwise lead to excessive foaming during the next washing cycle.
Appliance stops suddenly while washing is taking place
Cut in electricity supply to appliance.
Water supply has been interrupted.
Knocking sound can be heard while washing is taking place
A spray arm is knocking against the dishes inside the appliance.
Rattling sound can be heard while washing is taking place
Crockery has not been stacked properly inside the appliance.
Knocking sound coming from inlet valves
This is caused by the way the water pipes have been laid and it has no effect upon the way the appliance functions. There is no remedy for this.
... with the dishes, cutlery, etc.
Remnants of food are stuck to the dishes, cutlery, etc.
Dishwasher was not loaded properly. Jets of water could not reach all parts of the dishes, etc. Too many items in the rack. Items in the rack were touching each other.
Not enough detergent was added to dispenser.
Selected wash programme was not intensive enough.
Rotation of spray arm was obstructed by dish, etc.
Nozzles in spray arm are blocked by remnants of food.
Filters are blocked.
Filters have been incorrectly fitted.
Plastic items are discoloured
Not enough detergent was added to dispenser.
White stains are left on crockery, glasses have a milky appearance
Not enough detergent was added to input compartment.
Amount of
Although water is quite hard, no salt has been put in appliance. Water softener was set too low. Lid on salt container is not screwed tight.
If you used a
24
