![](/images/new-backgrounds/1131657/13165729x1.webp)
Suspended Ceiling Mount Backbox Modules Instruction Manual Advanced Commands | EN 15 |
|
|
6BASICDOME ADVANCED COMMANDS
To use Locked Commands, you must first unlock the BasicDome via
SETUP
GENERAL
PTZ
CAMERA
Commands
FastAddress
Display FastAddress
Auto Iris
Auto Focus
Gain Control
Sector Title Edit
Sector Blanking
Bypass All Blanking
Lock/Unlock Commands
Password
Factory Home Position
Restore Defaults
Left Limit
Right Limit
Inactivity
Preset Tour Period
AutoPivot
Select White Balance
Sharpness
Iris Adjust
Sync Mode
Adjust Line Lock Phase
Switch Polarity
Keystrokes
Description
Sets/changes the dome address using the keyboard and
Sets/changes the dome address using the keyboard and
Briefly displays all dome addresses.
Camera (iris) adjusts automatically/manually (On/Off) to light conditions.
Camera automatically/manually (On/Off) focuses.
Turns gain control to Automatic or Off. When in Automatic mode, the gain increases to compensate for darker scenes.
Turns On/Off the
Changes the characters and position of the display.
Edits the current Sector name.
Masks video from being displayed in selected sectors.
Removes all viewing restrictions imposed by sector blanking but keeps their locations in memory.
Allows/Disallows Locked Commands to be accessed.
Sets or displays password. See AutoDome Security, SECTION 4 for details.
SET recalibrates camera and returns it to home position.
Restores Factory Defaults.
Sets the current position as the left limit of Auto Pan. Default is 0 degrees.
Sets the current position as the right limit of Auto Pan. Default is 359.9 degrees.
Selects the mode that the dome reverts to after a duration without operator activity. Default is OFF.
Increase/Decrease (On/Off) the time between Presets during Preset Tour.
Allows a subject to be followed while beneath the camera, without inverting the picture. Default is ON.
Adjusts camera color (white balance) for specific settings.
Picture (vertical aperture) sharpens/softens.
Edits the Auto Iris level.
Sets camera sync for
Changes the phase delay of the camera when in external line lock mode.
Switches the polarity of the Zoom, Focus, and Iris controls.
Bosch Security Systems 10 December 2003