Bosch Appliances BSH Dishwasher PLUMBING PREPARATION continued, Dishwasher Preparation

Models: BSH Dishwasher

1 48
Download 48 pages 19.05 Kb
Page 8
Image 8
PLUMBING PREPARATION (continued)

Plumbing Preparation/ Dishwasher Preparation

Air Gap

Y-branch

DISHWASHER PREPARATION Tailpiece

Figure 7

Figure 8

 

 

 

Remove plug

Figure 9

Figure 10

Figure 11

PLUMBING PREPARATION (continued)

Drain Plumbing

Under Sink Drain Connection

If the dishwasher is to drain either directly into the household drain plumbing or through an air gap, install a y-branch tailpiece under the sink as shown in Figure 7.

Installing an Air Gap

If local ordinances require an air gap, as shown in Figure 8, install it according to the manufacturer’s

instructions.

Disposer

Make sure to remove the disposer’s dishwasher drain connection plug before connecting the dishwasher drain hose. See Figure 9.

DISHWASHER PREPARATION

Dishwasher preparation involves four tasks:

Installing the Mounting Brackets

Removing the Toe Panel

Installing the 90° elbow fitting

Junction Box Preparation

Installing the Countertop Mounting Brackets

Before installing the supplied countertop mounting brackets, decide which method of securing the dishwasher into its enclosure will be used. Once the mounting brackets are installed on the dishwasher, removing them is difficult and will damage the mounting brackets and the dishwasher.

The dishwasher can be secured into its enclosure in two ways:

1Top Mount is used for countertops made of wood or other materials that can easily drilled. Orient the mounting brackets as shown in Figure 10, and position the two small tabs on the mounting brackets over the two slots on the dishwasher’s front corners.

Push the mounting brackets down firmly to insert the tabs into the slots.

2Side Mount is used for countertops made of marble, granite, or other very hard materials that cannot be easily drilled. Bend the mounting brackets along the small holes and in the same direction as the two small tabs. Orient the mounting brackets as shown in Figure 11, and position the two small tabs on the mounting brackets over the two slots on the dishwasher’s front corners. Push the mounting brackets down firmly to insert the tabs into the slots.

Manual backgroundWARNING

Avoid Tip Over Hazard

Do not use the dishwasher until it is completely installed. When opening the door on an uninstalled dishwasher, carefully open the door while supporting the rear of the unit. Failure to follow this warning can result in serious injury.

8

Page 8
Image 8
Bosch Appliances BSH Dishwasher important safety instructions PLUMBING PREPARATION continued, Dishwasher Preparation