Electrical Connection/ Door Tension Adjustment/ Base and Toe Panel
1/8” 
3mm
ELECTRICAL CONNECTION (continued)
WARNING
Avoid Fire Hazard
Make sure there are no loose electrical connections. Make sure all electrical connections are properly made.
Figure 32
Figure 33
Figure 34
•Do not
•Extend the dishwasher’s stranded wires 1/8” (3mm) beyond the power supply cable’s solid wires, as shown in Figure 32.
5Using the supplied wire nuts, connect the electrical supply wires to the dishwasher’s wires, black to black, white to white, and green or bare. Make certain that the insulated wires show no bare wire from the bottoms of the wire nuts. Gently tug the wires to make certain they are securely connected.
6Press the wires into the junction box as shown in Figure 33. Make certain that the wire nuts do not loosen.
7Place the cover on the junction box and secure it to the junction box with the supplied screw.
DOOR TENSION ADJUSTMENT (only on fully integrated models with custom door panels)
After the dishwasher and custom door panel are installed, open and close the door several times to make sure that it does so with ease. If the door falls open too quickly, the spring tension needs to be adjusted.
To Adjust the Spring Tension:
1Obtain the provided Spring Tension Screws from the Integrated Door Panel Installation Kit.
2Insert the screws as shown in Figure 34. Turning the screw clockwise increases the spring tension.
TOE PANEL INSTALLATION
Method A - Regular Toe Panel Installation Use the toe panel screws from the Dishwasher Installation Kit to install the toe panel as shown in Figure 35.
Figure 35
14
