Tools and Materials Needed
TOOLS NEEDED
Hammer | Hole Saw | Pipe Wrench | Adjustable Wrench |
Tape Measure | Slot Screwdriver | Phillips Screwdriver |
Wire Cutter | Wire Stripper | Drill | Level |
|
MATERIALS NEEDED
(Additional materials may be required to comply with local codes.)
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper conductors rated 75°C or higher.
Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided dishwasher supply line.
90° elbow with 3/8” N.P.T. male threads on one leg, and sized to fit your water supply line (copper tubing/compression fitting, or braided hose) on the other leg.
Teflon brand tape or other pipe thread compound to seal plumbing connections.
UL listed conduit connector or strain relief.
2