CARE AND CLEANING
(continued)
Burner Assembly
The burner assemblies should be wiped clean often. Turn all controls OFF before removing burner parts.
The electrode of the spark igniter is exposed when the top of the burner is removed. Be careful not to push in any surface unit controls while the top of a burner is removed. A slight electrical shock might result which could cause you to knock over hot cookware.
CAUTION: DO NOT OPERATE THE BURNER WITHOUT ALL BURNER PARTS IN PLACE.
Burner
'__Grate
i | Burner Cap |
The burner grates and caps can be lifted off, making them easy to clean. Removing them gives you access to the burner base and burner bowl. Wash the grate and cap in hot, soapy water and rinse with clean
s,ot
water. Dry them with a
_BurnerBowl
Burner Grates
regularly and of course, after spillovers.
Wash them in hot, soapy water and rinse with clean
water. Dry the grates with a
To get rid of
rinse well, and dry.
To prevent rusting, apply a light coating of cooking oil on the bottom of the grates.
Although they're durable, the grates will gradually lose their shine, regardless of the best care you can give them. This is due to their continual exposure to high temperatures.
Do not operate a burner for an extended period of time without cookware on the grate. The finish
on the grate may chip without cookware to absorb the heat.
10