PROBLEM
BURNERS DO NOT
LIGHT
BURNERS HAVE YELLOW OR
QUESTIONS?
USE THIS PROBLEM SOLVER
POSSIBLE CAUSE
•Make sure electrical plug is plugged into a live power outlet.
•Slot in burner base may be clogged. Remove the obstruction.
•Burner parts not replaced correctly.
•Hole in burner cap behind igniter may be clogged.
(A)Yellow flames
Call for service | cones | Normal | for |
| LP gas | natural | gas |
BURNER FLAMES VERY LARGE OR YELLOW
BURNER CONTROL KNOB WILL NOT TURN
FAN DOES
NOT WORK
•If burner flame looks like (A), call for service. Normal burner flames should look like (B) or (C), depending on the type of gas.
•If cooktop is connected to LP gas. check all steps in the Installation Instructions.
•When the knob is at the OFF position, it must be pushed in before it can be
turned, and it can only be turned in a counterclockwise direction. When the knob is at any other position, it can be turned in either direction without being pushed in.
•The vent must be fully extended before fan will work.
•Fan control knob must be turned in clockwise direction to turn fan on.
If you need more help...call toll free: GE Answer Center _"_
800.626.2000
consumer information service
21