Installation
Install Strain Relief
Place strain relief in knockout below terminal block. See Figure 11: Strain Relief Knockout.
The strain relief provided with your range cord must be properly
,_ Warning: installed.
Strain reliefs vary. Carefully read and follow the instructions included with your strain relief.
1.In the knockout panel below the terminal block, remove the knockout that fits your strain relief.
2.Feed range cord through hole and strain relief up to terminal block. Allow for slack in the cord between the strain relief and terminal block.
3.Once cord length/slack has been adjusted, attach strain relief per instructions included with strain relief.
Figure 11: Strain Relief Knockout
Tip:
The knockout panel below the terminal block can be removed from the range to install the strain relief: Remove knockout panel from range, install strain relief in panel and reattach. DO NOT remove entire range back panel.
English 12
