SELECTING A WASH CYCLE
Selecting a Wash Cycle
The dishwasher will wash and dry the contents based on cycle selection made. Refer to Tables 3, 4 and 5: Wash Cycle Selection Chart to select the most ap- propriate cycle for the wash load.
Follow these steps to select a cycle and start the dishwasher:
Note: All indicator lights will remain illuminated until the on/ off switch is pressed or the door is opened.
Various Model Types
SHU/SHI Models:
1. | Close the dishwasher door, making sure |
| that door latches are closed. |
2. | Press the on/off switch. |
3. | Select the button for the program |
| desired.* |
4. | The dishwasher will start automatically |
On / Off
Power
Figure 24
SHU/SHI
CycleCountdown |
| Power |
|
| Delicate/ |
|
| Refill | |
88 |
| Scrub | Scrub | Regular | Econo | Quick | Rinse & | Rinse | |
|
|
| Plus | Wash | Wash |
| Wash | Hold | Agent |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Delay | Top |
|
Start | Rack | Cancel |
Hours | Only | Drain |
and continue to the end of the selected |
cycle. |
SHU 9950
5.At the end of the cycle the dishwasher will stop and either the “Clean” light will become illuminated, the LED display will show“CL” or “0”, or the dishwasher will beep.
SHU 9910/9920/9950/ 8800 & 8810
Models & SHV Models:
1.Open dishwasher door.
2.Press the on/off switch.
On/Off | INTEGRA Ltd. |
Figure 25
SHU 9910/9920 & SHV Models
On
Off
Cancel Drain
3.Push the button once for the program desired.
4.Close door until it latches and the pro- gram will begin.
5.Same as #5 above.
Push the desired button TWO TIMES if another program button is lit up.
Figure 26
VARIOUS END OF
CYCLE INDICATORS
*Clean light illuminates
*CL or 0 is displayed on the LED.
*Cycle Completion Beeper sounds off
www.boschappliances.com ENGLISH - 19
