PROGRAM OPTIONS & UNLOADING
Program Features for Integra Ltd.
Wash Light is illuminated when any wash cycle is in operation up until the completion of the final rinse cycle.
Dry Light is illuminated during the condensation | Wash | Dry | Clean | |
drying phase. | ||||
|
|
| ||
Clean Light is illuminated when the dishes are |
|
|
| |
cleaned, dried and ready to be unloaded. |
|
|
|
Condensation Drying
The combination of a high final rinse tempera- ture, the tub’s cool stainless steel interior and the sheeting action of a Rinse Agent result in effective and efficient drying. The closed con- densation drying feature is hygienic, and saves energy and money.
Note: For BEST DRYING results, it is essential to use a RINSE AGENT and keep the Rinse Dispenser FULL. (See Figure 31).
Additional Drying Temperature for Models SHU9952/5/6UC:
1.Open the door, hold down the “Regular” but- ton and simultaneously turn the dishwasher on. The display will blink with a code of “0” or “1”. Release the buttons. You are in program mode.
2.If the display blinks with a “0”, you are programmed for a lower temperature rinse. If the display blinks with a “1”, you are programmed for a higher tem- perature rinse, thus improving dish drying.
3.To change the program code, press the “Regu- lar” button.
4.When you have the desired code selected, turn the dishwasher off to take it out of program mode.
• Note: For the SHV 6800 models, push “Scrub Wash” button in lieu of “Regular” button.
Unloading
When unloading the dishwasher always unload the lower rack first and then unload the upper rack. This will minimize the chance of water drops from the upper rack falling on the dishes in the lower rack. The silverware basket(s) of the Bosch dishwasher can be removed for easy unloading.
The dishware tends to get hot immediately following a completed cycle. If the door is opened slightly for a few minutes before unloading, the dishes will cool more quickly.
Figure 30
Figure 31
Figure 32
RinseAid
D’agentde rinçage
Agente para enjuagar
www.boschappliances.com
