About This Guide
The PagePac Plus AmpliCenter Installation and Use Manual explains the features of the AmpliCenter, how to install and configure the AmpliCenter, and interface to a communication system and other auxiliary equipment.
It is intended that PagePac Plus be installed by a trained telephone, audio, or electrical installer with basic electronic knowledge. PagePac Plus conforms to common installation practices and preferences found within the Telcom Electrical and Commercial Sound installers manual.
How to Use This Guide
■Overview. This section provides an overview of AmpliCenter features and capabilities, specifications, and a summary of installation steps for the experienced installer.
If you are installing the PagePac Plus AmpliCenter for the first time, you should read this entire guide before getting started to familiarize yourself with the features.
■Hardware Configuration. This section describes and illustrates the AmpliCenter D20, D100, and D300 units.
■Installing the Hardware. This section provides instructions for mounting the PagePac Plus AmpliCenter hardware on a wall or in a standard 19" equipment rack. Complete, detailed instructions for connection and operation with telephone systems, music source, speakers, and any control device inputs or outputs is provided.
■Maintenance and Customer Support. This section gives some basic troubleshooting tips if a paging zone does not operate properly after connection to the AmpliCenter. Should a problem arise which requires technical assistance, call AT&T technical support groups at the numbers listed in this section.
Use the Contents and Index to locate specific items of interest.
Before You Start
Before installing your system, read and understand the safety instructions in section 3. Be sure you have all the necessary parts— see Shipping Container Contents, below. In addition, see Tools Required in section 3 for a few tools and test equipment that will be needed for installation.
