ATTO Technology 463-248-202 manual Installation Steps

Installation Steps

NOTE: The numbers in these steps match the numbers in figure 1-1.

1.Mount the PagePac Plus AmpliCenter to either the wall, cabinet or a rack.

2.Pull cables.

3.Hookup cabling to AmpliCenter and auxiliary equipment. (Refer to Example Setups in section 3.) Use stick-on labels to identify the AmpliCenter/zone (i.e., cafeteria - zone 1).

4.Set the AmpliCenter Telephone Mode Selection Switch to match the host telephone system and make connection.

5.Install power cord and plug into outlet.

6.Test paging zone served by the AmpliCenter. (Refer to Testing the System, in section 3.)

7.Adjust sound levels using AmpliCenter controls. (Refer to Adjustments, in section 4.)

TO HOST TEL.

SYSTEM

MUSIC INPUT

Figure 1-1. Installation Steps

Overview 1-3