38 en | Navigating the Monitor High Performance LCD Monitors
F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Secur ity Systems, Inc.
Trigger Input Select the video input source that the monitor
displays when an alarm is activated. When the
monitor receives an alarm input, it switches to the
speficied input source.
AV1
AV2
S-Video
Component
HDMI
DVI
PC
Buzzer Activates an audible signal when the monitor
receives an alarm input and switches to the Trigger
Input video source.
Note: If the Input video source is the same as the
Trigger Input, the monitor does not sound the
buzzer.
ON or OFF
Trigger Time Select the amount of time, in seconds, that the
monitor displays the Trigger Input video source.
0–100 seconds
Trigger Option Select the type of physical trigger input. Consult the
manual for the alarm source to determine your
selection.
N/C
(normally closed)
N/O
(normally open)
High (2–5 V)
Low (< .6 V)
Display Type Select the mode in which the monitor displays the
Trigger Input. The monitor takes one of the following
actions:
–Displays the Trigger Input in the Picture-in-
Picture position (PIP & FULL) of the current
video input source.
Note: The main video source must support the
Trigger Input source as a PIP option. See
Section5.6 PIP Menu, Page 35.
–Switches the display to show the Trigger Input
in the full screen (FULL).
PIP & FULL
FULL
Option Definition Selections