40 en Navigating the Monitor | High Performance LCD Monitors |
|
|
Selecting Input Sources for Auto Switching
Use this menu to add or remove an input source from the Auto Switching cycle.
Auto Switching
|
| AV1 | On | ||
|
| AV2 | On | ||
|
|
| On | ||
|
| Component | On | ||
|
| HDMI | On | ||
|
| DVI | On | ||
|
| PC | On | ||
|
|
|
|
|
|
| :Move |
| :Input |
| :Menu |
Table 5.9 Auto Switching Menu – Input Source Selection
1.Use the Up and Down arrow buttons to select an input source.
2.Press the Right Arrow to change the status of the input source.
3.Use the Up and Down arrow buttons to change the status of the input source:
–Select On to include the input source in the cycle.
–Select OFF to remove the input source from the cycle.
F.01U.076.723 3.0 2009.03 | Installation Manual | Bosch Security Systems, Inc. |
