Bosch Power Tools 1375A manual 180 to 230 mm in diameter, With, HWS 85/180, HWS 88/180, HWS 88/230

ANGLE GRINDERS.

	for grinding wheels						(Hz)	grinding
			number		(V)			-		(mm)
	180 to 230 mm in diameter	Order		Voltage		Frequency	Admissiblewheels		l
The correct grinder/sander for
every application
	HWS 85/180	0 602 329 001		265	200		180
Extremely robust and maintenance-
		0 602 329 004		135	200		180
friendly motors
		0 602 329 007		72	200		180
Constant speeds throughout the
whole power range for top economy
and longest possible service lives		0 602 329 034		200	300		180
Robust angular gear with high
		0 602 329 011		72	300		180
operational performance
		0 602 329 036		200	300		180

HWS 88/180	0 602 331 001	265	200	180
	0 602 331 004	135	200	180
	0 602 331 007	72	200	180
	0 602 331 003	265	200	180
	0 602 331 034	200	300	180
	0 602 331 036	200	300	180
HWS 88/230	0 602 332 001	265	200	230
	0 602 332 011	200	300	230
	0 602 332 034	200	300	230
	0 602 332 003	265	200	230
	0 602 332 036	200	300	230
	0 602 332 005	135	200	230

The machines come equipped with a special 4-m-long cable without plug.

						(W)			current	(A)								complete
		speed			power		(W)				without
No						power		Nominal					Toolholdingfixturechuck		Switchtype	Remarks	Comes		AccessoryPart
	(rpm)			NominalconsumptionNominalOutput					Weightcabel			(kg)		(mm)
load																	with		number
8500			1200		1000	3.3			5.6		Mounting flanges M 14 Lever with lock					For medium-heavy	Protective guard l 180 mm		1 605 510 176
											for grinding wheels					grinding work. SDS-clic	Mounting flange		2 605 703 014
8500			1200		1000	6.4			5.6
											with bore-l					available as special
																	Round nut		1 603 345 043
											2,3 mm					accessory.
8500			1200		1000	11.8			5.6
																	Pin-type wrench		1 607 950 061
																	Open-ended spanner SW 17		2 607 950 511
																	Auxiliary handle		1 602 025 022
8500			1800		1500	6.4			5.6
8500			1800		1500	17.7			5.6
8500			1800		1500	6.4			5.6					Toggle

8500	1950	1500	5.0	6.5	Mounting flanges M 14 Lever with lock		For medium-heavy	Protective guard l 180 mm	1 605 510 176
					for grinding wheels		grinding work. SDS-clic	Mounting flange	2 605 703 014
8500	1950	1500	10.0	6.5
					with bore-l		available as special
								Round nut	1 603 345 043
					2,3 mm		accessory.
8500	1950	1500	18.0	6.5
								Pin-type wrench	1 607 950 061
								Open-ended spanner SW 17	2 607 950 511
						Toggle		Auxiliary handle	1 602 025 022
8500	1950	1500	5.0	6.5
						Lever with lock
8500	2900	2200	10.0	6.5
8500	2900	2200	10.0	6.5		Toggle
6600	1950	1500	5.0	7.0	Mounting flanges M 14 Lever with lock		For medium-heavy	Protective guard l 180 mm	1 605 510 173
					for grinding wheels		grinding work. SDS-clic	Mounting flange	2 605 703 014
6600	2900	2200	10.0	7.0
					with bore-l		available as special
								Round nut	1 603 345 043
					2,3 mm		accessory.
6600	2900	2200	10.0	7.0
								Pin-type wrench	1 607 950 061
								Open-ended spanner SW 17	2 607 950 511
						Toggle		Auxiliary handle	1 602 025 022
6600	1950	1500	5.0	7.0
6600	2900	2200	10.0	7.0
						Lever with lock
6600	1950	1500	10.0	7.0

Your specialist dealer can provide you with information on the complete set of quality accessories.

30 31