DSDA iSCSI Disk Array Series | Configuration through the Web Interface en | 9 |
|
|
|
2.Select from the Control Panel of your computer Network Connections, Properties. Here, configure your network interface to use IP address 10.10.10.9 with Subnet mask 255.0.0.0.
Example screen:
NOTICE!
i The IP address 10.10.10.9 is an example. The IP addresses 10.10.10.10 and 10.10.10.11 are the default IP addresses for the storage system and cannot be used otherwise.
3.Connect your computer directly to the network port labeled e0a on the storage system, using a crossover cable.
Alternatively, connect your computer to the network the storage system is connected to.
4.Open a Web browser and enter http://10.10.10.10/na_admin. You will be asked to log in.
Bosch Security Systems | Installation Guide | V 1 2008.08 |