18 en Adding Storage

DSDA iSCSI Disk Array Series

 

 

2.Set the correct Shelf ID by pressing the + or – button at the back of the shelf, next to the ID display.

Note: Do not use identical IDs for different shelves.

6.1.2Connecting the Power Supplies

3. If not already done, power on the base unit. On the shelf, connect both power supplies and switch them on. Wait 30 seconds to allow the shelf to initialize.

Make sure that the shelf displays the correct shelf ID on the front display before you continue.

V 1 2008.08

Installation Guide

Bosch Security Systems