16 en Configuration through the Web Interface | DSDA iSCSI Disk Array Series |
|
|
47.On the Add Initiator Groups screen, click Next.
48.LUN ID: Leave this field blank. The lowest available ID will be used automatically. Click Next.
49.The changes are summarized on the LUN Wizard: Commit Changes screen. Click Commit to create the LUN.
If the LUN has been created successfully, a Success! screen will display.
50.Use the LUN Wizard to create all 16 (or the desired number of) LUNs. The system configuration is now done.
51.It is recommended to change the password for the Web interface access. In the navigation panel, select Security > Change Password.
52.If no further storage is to be added, disconnect your computer from the storage system. Connect the storage system to the CCTV network by plugging the network cable (not supplied) into the network port, labeled e0a.
V 1 2008.08 | Installation Guide | Bosch Security Systems |