01Before You Start

IPOD

10

Maintenance

Replacing the Fuse

Make sure the amperage matches the specified value when replacing the fu- ses. If the fuse is blown, replace it with a new one. Be sure you are using one with the correct rating. If the same problem occurs, it would be subjected to the malfunction. In such cases, please consult to the nearest service dealer.

Insert the Battery Holder into the Remote

Control.

IPOD Operation

During IPOD playback, connect the IPOD wire (5V) to the one in backside of the main unit. When the iPod is loaded, the unit will play a track. To go back to the source status, press iPod to enter into iPod setup:

8/97

disco-yeye

00:02:47

Note:

*Pressing and holding / in the monitor also performs the same function

Switch

During playback, press VIDEO to turn to IPOD, the screen shows: Play video on your

iPod. Then touch screen to return. Then

you can operate your iPod. Press VIDEO again to return to main unit operation.

Note:

*This function is operated by using the touch screen only.

Repeat Playing

!Warning

Never use the fuse with the rated amperage more than that supplied to your unit, otherwise it will damage the unit.

Replacing the Remote Battery

When the range of the operation of the remote control becomes short

or stops operating, Replace the battery. Be suer to use a lithium Battery button Cell Cr2025.

Gently pull out the Battery Holder while pressing the Stopper.

Precautions on Using Lithium Battery

Always keep the lithium battery beyond children s reach. In case swallowed, see a doctor immediately.

Cleaning the battery with a dry cloth, to ensure its perfect connected.

Install the battery with the proper polarity.

To prevent short circuit, do not use metal tweezer to handly the battery.

!Warning!

Improper handle with the battery may lead to explosion.

It cannot be charged , disassembled or thrown into a fire.

MENU Back to the previous menu

Briefly press to play previous track, press and hold to fast forward.

Briefly press to play next track, press and hold to fast rewind.

Play/ pause

VIDEO Mode switch between IPOD and main unit

SRC Mode switch

Selecting Tracks

During IPOD playback, press21 to return to the beginning of the current track,

press 21 again within 3 seconds to play

previous track ,press 21 to play next track .

Note:

*Pressing / in the monitor to performs the same function

Playing Track F.F/F.REW

During playback, press 15 RPT to track

repeat, disc repeat, off. Press it again to

cancel this function.

Note:

*This function is operated by using the remote control only.

Playing Tracks at Random

During IPOD playback, when pressing 16

RDM button, Shuffle off, Shuffle Track,

Shuffle Album will be activated.

Note:

*This function is operated by using the remote control only.

Pause the Playback

During IPOD mode, press 27 button to

pause the playback, Press it again to return

to normal playback.

Note:

* Press

 

in the monitor or briefly press

 

SEARCH+/- on the head unit also performs

the same function.

Put the button-type battery with mark(+) upward into the Battery Holder.

6

Press and hold20 or to play the track fast forward or fast rewind . Do it again or press ENTER to resume to play normally.

43

Page 6
Image 6
Boss Audio Systems bv9565bi manual Ipod, Maintenance