English | Español | Português | Français | Deutsch |
Reinserting the front panel
1.Insert one side of the panel fully into the opening in the main unit.
2.Then push the other end of the front panel into the main body. You should hear a “click.” (Figure 9)
NOTE: If the panel fails to lock into position properly, the function of some controls may be impaired, and some segments of the display may not become illuminated. If this occurs, press RELEASE and reinstall the front panel.
Figure 9 Insert one end of the panel into the opening in the main unit. Then push the other end of the panel into main unit until you hear a “click”
Removing the head unit
Should you need to remove the head unit, first remove and store the front panel as described on the preceding page.
After you have removed the front panel, insert the removal keys supplied with the head unit into the two removal slots as shown in the drawing until you feel a “click.” You can now use the levers to pull the unit from the mounting surface. (Figures 10 and 11).
Removal key slots
