4 Remove the paper feed roller module, holding up the paper feed case along the groove of the feed cover to pull the claw out of the case.

A – Claw

B – Groove

C – Paper Feed

Case

5 Install the new paper feed roller module with its gear on the right.

Hang both ends of the paper feed roller module.

While slightly lifting the paper feed roller module, pass the claw along the groove of the feed cover.

Attach the bearings at both ends of the paper feed roller module into the guide grooves of the chassis.

A – Chassis

B – Bearings

C – Green Levers

42

Page 43
Image 43
Bowe, Bell + Howell 1200, 1400U manual Claw Groove Paper Feed Case