Breville BJE510XL manual Dissasembling your ikon Juice Fountain Care and cleaning

Dissasembling your ikon Juice Fountain

Care and cleaning

Step 1

Ensure the ikon Juice Fountain is turned off by pressing the ‘On/Off’ switch on the control panel to ‘Off’.

Step 2

Remove the pulp container by tilting the base away from the motor base, then unlatch it from under the juicer cover and the container support extending from under the motor base.

Step 3

Use the grip handle located on the safety locking arm to lift the locking arm from the juicer cover and lower down out of position.

Step 4

Lift the juicer cover off the ikon Juice Fountain.

Step 5

Remove the filter bowl surround with the stainless steel filter basket still in place.

Ensure the ikon Juice Fountain is turned off by pressing the ‘On/Off’ button on the control panel to ‘Off’. Then switch the appliance off at the power outlet and unplug the cord.

Ensure the ikon Juice Fountain is correctly disassembled. Refer to Disassembling your Breville ikon Juice Fountain (page 11).

For easier cleaning:

Clean as you go to avoid dried on juice or pulp residue.

Immediately after each use, rinse removable parts in hot water to remove wet pulp. Allow parts to air dry.

To minimize cleaning, line the pulp container with a plastic freezer bag to collect the pulp. Pulp can then be used in other dishes (see page 33) or as compost for the garden or discarded

(see page 17).

Note

Cleaning the motor base

1.Wipe the motor base with a soft, damp cloth then dry thoroughly.

2.Wipe any excess food particles from the power cord.

Cleaning the filter bowl surround, juicer cover, food pusher, pulp container

1.Wash all parts in warm soapy water with a soft cloth. Rinse and dry thoroughly.

The filter bowl surround, juicer cover and pulp container are dishwasher safe (top shelf only).

Note

Cleaning the filter basket

For consistent juicing results always ensure that the stainless steel filter basket is thoroughly cleaned using the supplied cleaning brush.

1. Soak the stainless steel filter basket in hot soapy

water for approximately 10 minutes immediately

after juicing is completed. If pulp is left to dry on

the filter it may clog the fine pores of the filter

mesh thereby lessening the effectiveness of

the juicer.

2. Using the cleaning brush, hold the filter basket

under running water and brush from the inside of

the basket to the outer rim. Avoid touching the

small sharp blades in the center of the filter

basket. After cleaning the filter basket, hold it up

towards a light to ensure the fine mesh holes are

not blocked. If the holes are blocked, soak the

filter basket in hot water with 10% lemon juice to

Step 6

To remove the stainless steel filter basket from the filter bowl surround, insert fingers under the grooves market ‘LIFT BASKET’ and lift the filter basket up. For easy cleaning, it is recommended to remove the filter basket over the sink.

THE STAINLESS STEEL FILTER BASKET CONTAINS SMALL SHARP BLADES TO CUT AND PROCESS FRUITS AND VEGETABLES, AVOID TOUCHING BLADES WHEN HANDLING THE FILTER BASKET.

Do not use abrasive scouring pads or cleaners when cleaning the parts or motor base as they may scratch the surface.

Note

loosen the blocked holes. Alternatively, wash the

filter basket in the dishwasher.

12 13