Breville BJE510XL manual Care and cleaning Troubleshooting

Care and cleaning continued

Troubleshooting

The stainless steel filter basket may be washed in the top shelf of any dishwasher.

Note

•Do not soak the stainless steel filter basket in bleach or other abrasive cleansers.

•Always treat the filter basket with care as it can be easily damaged.

Cleaning the juice jug

1.Rinse the juice jug and lid with froth attachment under running water.

2.Wash both parts in warm soapy water with a soft cloth. Rinse and dry thoroughly.

The juice jug and lid may be washed in the top shelf of any dishwasher.

Note

Removing stubborn or strong food stains and odors

Discoloration of the plastic may occur with strongly colored fruit and vegetables. To help prevent this, wash parts immediately after use. If discoloration does occur, the plastic parts can be soaked in water with 10% lemon juice or they can be cleaned with a non abrasive cleaner.

DO NOT IMMERSE THE MOTOR BASE IN WATER OR ANY OTHER LIQUID.

THE CENTER OF THE FILTER BASKET AND FEED CHUTE CONTAINS SMALL SHARP BLADES TO PROCESS FRUIT AND VEGETABLES DURING THE JUICING FUNCTION. DO NOT TOCUH BLADES WHEN HANDLING THE FILTER BASKET OR FEED CHUTE.

Machine will not work when switched ‘ON’

The safety locking arm may not be correctly engaged in the vertical operating position with the locking arm located into the two grooves on either side of the juicer cover (page 8 step 5).

Motor appears to stall when juicing

1.Wet pulp can build up under the juicer cover if the juicing action is too vigorous. Try slower juicing action by pushing the food pusher down more slowly (refer to page 10, step 4). Follow Dissembling and Cleaning instructions and clean the filter bowl surround, the stainless steel filter basket and the juicer cover.

2.The ikon Juice Fountain will automatically stop operating if the motor is stalled for more than 10 seconds. Either too much food is being processed at one time or the pieces are not small enough. Try trimming the food or cutting into smaller pieces of even size and processing a smaller amount per batch. To continue juicing, reset the ikon Juice Fountain by pressing the ‘On/Off’ switch on the control panel to ‘Off’ then turn the appliance back on by pressing ‘On/Off’ switch to ‘On’.

3.Hard fruits and vegetables will put excess strain onto the motor if a low speed is selected. Please refer to the juicing guide on Page 9 to determine the correct speed for the fruits and vegetables selected on juicing.

Excess pulp building up in the stainless steel filter basket

Stop the juicing process and continue the Disassembling instructions. Remove the juicer cover, scrape off pulp, reassemble and begin juicing again. Try alternating (soft and hard) vegetable and fruit varieties.

Pulp too wet and reduced extracted juice

Try a slower juicing action.

Remove stainless steel filter basket and thoroughly clean mesh walls with a cleaning brush. Rinse the filter basket under hot water. If the fine mesh holes are blocked, soak the basket in a solution of hot water with 10% lemon juice to unblock the holes or wash in the dishwasher. This will remove excess fiber build up (from fruit and vegetables) which could be inhibiting the juice flow.

Juice leaks between the rim of the Juicer and the juicer cover

Try a slower juicing speed and push the food pusher down the feed chute more slowly (refer to page 10, step 4).

Juice sprays out from spout

Use Juice jug and lid provided, or if juicing into a glass please use the custom designed juice nozzle.

14 15