5.Remove air cleaner assembly and set aside (Figure 30).

Figure 30

8.While leaving the stepper motor attached, carefully slide carburetor assembly off engine.

9.Remove bowl nut (Figure 33) and the fuel bowl. Check for damage, leaks, and gummy residue.

6. Inspect carburetor overload hose (D, Figure 31).If there

Figure 33

 

is fuel leaking from this hose, the fuel inlet could be

 

blocked and will require cleaning.

 

10. Remove the float hinge pin (Figure 34).

Not

Reproduction

 

D

 

for

 

 

Figure 31

Figure 34

7. Remove the hose that is connected to carburetor assembly (Figure 32).

Figure 32

21