Features & Controls
| Reproduction | |
| Not | for |
Control Functions |
| |
The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of s v ral controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.
|
|
| Throttle Control |
|
|
|
| Deck Transport Adjustment | |
|
|
|
|
|
|
| |||
The throttle controls engine speed. Move the | Handle, Cutting Height Adjustment Handle | ||||||||
|
|
|
|
| |||||
throttle forward to increase engine speed and back | & Deck Lift Lock Lever | ||||||||
to decrease engine speed. Always operate at FULL | These control the cutting height of the mower deck: | ||||||||
throttle. | |||||||||
|
|
|
|
| |||||
Choke
Close the choke for cold starting. Open the choke once the engine starts. A warm engine may not require choking. Pull the knob UP to close the choke. Push to knob DOWN to open the choke.
Fuel Tank Cap
To remove the cap, turn counterclockwise.
Cutting Height Adjustment Handle: Turn the cutting height adjustment handle CLOCKWISE to raise the cutting height of the mower;
Deck Transport Adjustment Handle & Deck Lift Lock Lever: Pull the deck transport handle adjustment backwards and up until it latches into place to raise the cutter deck to the TRANSPORT position. To lower the cutter deck to the OPERATION position, release the deck lift lock lever and push the deck transport handle forward and down.
11