Regular Maintenance
Change Oil & Filter |
| |
1. Warm engine by running for a few minutes. (Refer | C | |
B | ||
to the engine operator’s manual for oil & filter | ||
replacement instructions.) |
|
2. Route the oil drain hose (A, Figure 13) over the side of the engine deck and underneath the fuel tank.
3. Place a small pan under the oil drain hose to catch the oil. Using the appropriate tools, remove the
cap from the oil drain hose and drain the engineA oil.
4. After draining, replace the cap and wipe up any |
| |
Figure 13. Engine Oil Drain | ||
spilled oil. Reposition the oil drain hose so that is | ||
A. Oil Drain Hose | ||
curved away from the engine and in front of the | ||
B. Engine Oil Filter | ||
left hydraulic pump. | ||
C. Engine Oil Fill | ||
|
5. Place an absorbent shop cloth under the engine oil filter (B). Remove the engine oil filter and replace with a new one.
6. Remove the shop cloth and wipe up any spilled oil.
7. Add new oil through the engine oil fill (C). See |
| |
| Reproduction | |
the engine operator’s manual for specific oil | for | |
recommendations. |
|
|
| Not |
|
23