
Regular Maintenance
Checking / Adding Fuel
To add fuel:
1.Remove the fuel cap (A, Figure 18).
2.Fill the tank to the bottom of the fill tube. This will
leave room in the tank for fuel expansion. | A |
|
NOTE: Do not overfill. Refer to your engine manual for specific fuel recommendations.
3. Install and hand tighten the fuel cap.
4. Repeat same process for opposite tank.
WARNING |
|
|
|
| |
|
|
| Figure 18. Fill Fuel Tank | ||
Diesel fuel is highly flammable and must be |
|
| A. Fuel Cap | ||
handled with care. Never fill the tank when the |
|
|
|
| |
engine is still hot from recent operation. Do |
|
|
|
| |
|
|
| Do not use Kerosene in place of diesel | ||
not allow open flame, smoking or matches in |
|
|
| ||
the area. Avoid |
|
|
| fuel or mix with diesel fuel. Kerosene will | |
spills. |
|
|
|
| damage the engine. |
| Reproduction | ||||
|
| for | Consult the e gi e manufacturer’s manual | ||
Do not drain or replace fuel filter when engine |
|
|
| for specific fuel recommendations. | |
is hot, as spilled fuel may ignite. Make sure the |
|
|
|
| |
filter drain valve is fully closed before returning |
|
|
|
| |
the unit to service. |
|
|
|
|
|
WARNING |
|
|
|
|
|
Fuel leaked or spilled onto hot surfaces or |
|
|
|
| |
electrical components can cause a fire. To |
|
|
|
| |
help prevent possible injury, turn the ignition |
|
|
|
| |
switch off when changing fuel filtersNotor water |
|
|
|
| |
separator elements. Clean up fuel spills |
|
|
|
| |
immediately. |
|
|
|
|
|
|
|
|
|
|
|
29