Troubleshooting, Adjustment & Repair

 

Fine Adjustment Procedure (52” Models Only)

 

1. Loosen the jam nut (A, Figure 50) and turn the fine

 

adjustment bolt (B) to adjust the deck height until

B

the back measurement equals 4” (10,2 cm).

 

• Turn the bolt CLOCKWISE to raise the deck.

A

 

• Turn the bolt COUNTER-CLOCKWISE to lower the deck.

2. Position the outside mower blades so that they face front-to-back.

3.Re-measure from the front tip of the blade from the cutting edge to the ground. Measure from the

rear tip of the blade from the cutting edge to the

Figure 50. Fine Adjustment of the Deck Cutting

ground. Repeat the process for the other side of

Height

the machine.

A. Jam Nut

4. Once the back measurement equals 4” (10,2 cm),

B. Fine Adjustment Bolt

 

re-tighten the jam nut.

 

Reproduction

Not

for

 

46

www.SnapperPro.com