Regular Maintenance

Fuse Location

The fuse block is located on the side of the instrument control panel mounted on the right hand side

fuel tank. Refer to Figure 39 for the location and amperage of the fuses used in this machine.

S/N:2015276814 & Below

A.PTO Clutch: 20 amp fuse

B.Fuel Solenoid: 20 amp fuse

C.Alternator: 20 amp fuse

D.Main: 40 amp fuse

S/N: 2015276815 & Above

A.Key Switch: 20 amp fuse

B.Charge Circuit: 20 amp fuse

C.PTO Clutch: 20 amp fuse

D.Auxiliary: 20 amp fuse

5100983

A BC D

E FG H

Figure 39. Fuse Location Decal

Gearbox Maintenance

Reproduction

 

 

 

orf

A

Check Gearbox Oil Level

 

 

TOP

1. Remove fill plug (A, Figure 40) on gearbox.

 

 

 

2. Once plug is removed, oil should seep out of fill

 

 

 

plug hole. If no oil drains out, fill with SAE 80-90

 

 

 

weight gear oil until oil starts to seep fr m h le,

 

 

 

then replace fill plug.

 

 

 

 

Changing Gearbox Oil

 

 

 

 

NOTE: The gearbox lubricant should be changed after

 

 

the first 100 hrs. or 30 days of operation, then after

 

 

 

500 hours or 12 months.

Not

B

FRONT

1. Remove the mower deck drive belt (see MOWER

 

 

DRIVE BELT REMOVAL & REPLACEMENT for

 

Figure 40. Gearbox Oil Level

 

instructions).

 

 

 

 

 

A. Fill Plug

 

2. Rotate the the mower deck drive pull y on the

 

 

 

B. Drain Plug

 

gearbox so the drain plug is aligned with the

 

 

 

opening between the pulley spokes.

 

 

 

3. Place a container under the gearbox drain hole and remove the drain plug (B).

4. Replace drain plug and fill with SAE 80-90 weight gear oil until oil starts to seep from hole, then replace fill plug.

5. Using a parts solvent, thoroughly clean any excess oil from the pulley faces and groove.

6. Reinstall the mower deck drive belt (see MOWER DRIVE BELT REMOVAL & REPLACEMENT for instructions).

38

www.SnapperPro.com