CAUTION: Some parts may | Side View |
contain sharp edges. Wear | |
protective gloves if necessary. |
|
Fire Box Front Panel
Step 5
Using the one of the gas orifice tool provided remove the LP brass orifice from the tip of each gas valve assembly.
Wrench
Note: All orifices of the grill, except |
| |
rotisserie, are double orifices | LP Gas Orifice | |
type (LP gas and natural gas). | ||
| ||
You only remove the LP gas |
| |
orifice tip. |
|
Step 6
Remove all the control knobs from the control panel and set aside for later use.
Step 7
Figure 1 shows valve stem and bezel with both screws. Place stop plate over valve stem as shown in Figure 2. Verify the tab and the stamped letter on the stop plates face out. Replace control knobs when finished.
WARNING: We recommend and |
|
|
request that you do not remove the |
|
|
control panel in order to access the |
| Stop Plate |
valve tips. If you choose to remove |
| Tab |
the control panel, you must replace |
|
|
the control panel bezels exactly as |
|
|
illustrated in Figure 2. Failure to |
|
|
replace the bezels as illustrated |
| Stop Pin |
could lead to personal injury and/or |
|
|
property damage. | Figure 1 | Figure 2 |
|
11
